Professional chimney service

The Heater First, Then the Chimney It Needs, Out of Kinneloa Mesa

Repair It or Replace It?

Measured Before Ordering
Written Option Sheets
Flue Scanned Before Inserts
Gas, Wood and Pellet Compared
Spark Screens on Every Cap
Based in Kinneloa Mesa
Measured Before Ordering
Written Option Sheets
Flue Scanned Before Inserts
Gas, Wood and Pellet Compared
Spark Screens on Every Cap
Based in Kinneloa Mesa

Chimney Sweep

Brushwork, vacuuming and a flue reading in one stop, so you learn whether the fireplace can take an insert while the soot comes out.

Open the plan

Chimney Inspection

Flashlight, mirror and camera work that tells you what the chimney is fit for now, and what it would need before an upgrade.

Open the plan

Chimney Repair

Mortar, crown and flue tile fixes, done in the order that protects the house first and leaves room for an insert later.

Open the plan

Fireplace Inspection

Hearth-level detective work: firebox, damper, smoke shelf and clearances checked, plus a note on which heating upgrades would fit.

Open the plan

Fireplace Repair

Hands-on fixes to fireboxes, dampers and surrounds, with a plain note on whether repair or an insert gives you more warmth.

Open the plan

Chimney Level 2 Inspection

Camera footage of every flue joint, used before a sale, after a quake or fire, and before any insert or relining job.

Open the plan

Chimney Cap Installation

Stainless hoods sized to your flue, or to the new liner once an insert goes in, with spark mesh for foothill wind.

Open the plan

Chimney Flashing Repair

Leak hunting where brick meets shingle, then new metal layered so water runs down the roof instead of into the attic.

Open the plan

Chimney Masonry Repair

Repointing, brick swaps and crown work that keep an old stack standing straight enough to carry a liner and insert.

Open the plan

Chimney Rebuilds

Teardown and rebuild of failed stacks, planned with the heating appliance in mind so the new flue fits it from day one.

Open the plan

Fireplace Cleaning

Ash out, glass clear, soot off the brick: a room-side cleaning for wood, gas and insert fireplaces, with notes on wear.

Open the plan

Gas Fireplace Cleaning

Yearly tune-ups for gas sets and inserts: burner ports opened, pilot cleaned, logs placed back where the manual shows.

Open the plan

Gas Fireplace Repair

Troubleshooting for gas sets that will not light or stay lit, tested part by part before anything is ordered.

Open the plan

Fireplace Remodel

Restyling the mantel, pad and facing around whichever heater goes in, so finish materials keep the right clearances.

Open the plan

Fireplace Inserts

Measured, sized and lined: wood, gas or electric inserts that turn an open masonry fireplace into a real heater.

Open the plan

Pellet Stove Repair

Electrical and mechanical diagnosis for pellet stoves: feed screw, hot rod, fans, sensors and board tested in order.

Open the plan

Wood Stove Repair

Restoration of tired stoves: baffle, brick, rope seals, glass and catalyst replaced so the fire burns slow and clean again.

Open the plan

Gas Logs

Ceramic log sets, vented or vent-free, fitted to your firebox with a valve, a clamped damper and the right burner size.

Open the plan

Fix the Old Fireplace or Fit an Insert?

One measuring visit answers both. The repair and the upgrade go on the same sheet, with the heat each one gives and the chimney work each one needs.

Call (747) 205-6979
Call (747) 205-6979